Schiedel LINER SYSTEMS
LINER SYSTEM FOR NEW AND EXISTING CHIMNEYS

The pumice liner system comes in a range of 15 diameters from 150mm to 1000mm internal diameter. The Pumice flue liners are for masonry chimneys where the linings are surrounded by 100mm of brick, block or stone.

The linings are suitable for all fuels but not suitable for condensing appliances –including pellet or biomass.

Pumice liners are ideal for new build as well as relining existing masonry chimneys.

Pumice Liners

Features
The features of this are:

Lightweight materials, easy to use ,handle and cut
Highly insulating pumice for better draw and minimum heat loss
600mm and 1000mm lengths mean fewer joints and fast to install
15 flue sizes available
Good resistance to temperature variations gives the maximum performance for your appliance

Three angles of bends available for maximum versatility.

Technical Specification
Pumice Liners
Pumice Liners
Applications / Installations

Construction begins by providing a suitable foundation and constructional hearth in accordance with Building Regulations and site requirements.

Stove in Recess Option
Our pre stressed lintels must be installed above the fireplace recess , for this method a support plate is required under the support block.

Alternatively a suitable cast-in-situ concrete slab lintel can be created above the fireplace recess. (See Isokern standard drawings for hole size depending on diameter of chosen flue).

The support block is bedded onto the slab lintel using weak mix mortar. A stainless steel adaptor is used to connect from the support block to the stove flue pipe. This adaptor is pushed up onto the support block spigot (fibre rope should be used to create a seal). It is recommended to have a minimum of 600mm length of flue pipe before connecting to the chimney.

Pumice Liners
Free Standing Stove Option
Open Fire Option
All Options
After Completion Use & maintenance

Components & Systems
Round Liners
Pumice Liners
SAP Code Description Weight (kg)
126372 150mm i/d 600mm high rebated liner (200mm o/d) 8
126498 175mm i/d 600mm high rebated liner (235mm o/d) 11
127685 200mm i/d 600mm high rebated liner (250mm o/d) 12
127715 225mm i/d 600mm high rebated liner (285mm o/d) 14
128546 250mm i/d 600mm high rebated liner (310mm o/d) 16
129036 300mm i/d 600mm high rebated liner (360mm o/d) 19
129360 350mm i/d 600mm high rebated liner (416mm o/d) 27
129567 400mm i/d 1000mm high rebated liner (470mm o/d) 50
129738 450mm i/d 1000mm high rebated liner (530mm o/d) 60
129927 500mm i/d 1000mm high rebated liner (590mm o/d) 70
130142 600mm i/d 1000mm high rebated liner (706mm o/d) 100